Wilderness Urethane 153

Wilderness Urethane 153

$81 – $405

Looking for a rustic stain look on a primed substrate? Our Wilderness Urethane offers a beautiful stained appearance that is mildew-resistant, easy to clean, and guaranteed not to fade. Plus, this product is easy to apply to a wide range of substrates and can be painted over if so desired.

Finish
Size	1 Gallon 5 Gallons Clear

Wilderness Urethane Features

BEAUTIFUL, RUSTIC APPEARANCE — Wilderness Urethane provides a rustic stained appearance to primed substrates. And it can easily accept paint if you want to change the finish in the future.

DURABLE FINISH — Our Wilderness Urethane offers built-in UV stabilizers to improve weather resistance and avoid degradation from sunlight exposure!

The Nitty Gritty

Product Specifications

Approved Substrates: LP SmartSide Panel
Note: to achieve a wood-stained look all these substrates must have a faux grain surface. This product is not recommended for smooth wood surfaces.
Application: Brush, roll, or spray.
Airless Spray: Reduce pressure to 1400 PSI and use a Graco 2:14 fine finishing tip.
Surface Prep: This product is designed for new construction buildings and not previously painted or stained substrates. Avoid raw wood: Wilderness Urethane was not designed to perform on raw wood substrates.
Dry Time: First coat dries to touch in 15 minutes. Two coats are recommended. The second coat can be applied as soon as the first coat is dry to touch.
Application Temperatures: 50 to 100 degrees.
Coverage: 350 square feet per gallon.
Special Features: Wilderness Urethane contains trans iron oxide nanotechnology pigments which are paired with a very tough urethane to provide our customers a finish that will maintain its appearance for a decade.
Shelf Life: 3 years.

Application Instructions

Wilderness Urethane 153

How to apply

Warranty Information

Wilderness Urethane 153